Led lamp easy to make

https://k61.kn3.net/taringa/8/2/3/B/7/0/JOSTIKERO_92/039.jpg

Hello steemit friends, in this post I will show you how to make a multi-colored led lamp.
To add a touch of color, I used a multicolored RGB LED strip along with its controller. This combination allows me to achieve a variety of colors and lighting effects.

Cut the acrylic sheet

https://k61.kn3.net/taringa/8/8/3/F/D/5/JOSTIKERO_92/989.jpg

Prepare the templates

You can download the templates of your choice from the Internet and print them on paper. They can also make their own templates.

Then cut out the stencils by keeping a little margin and make sure the acrylic sheet with the tape.

https://k61.kn3.net/taringa/E/B/2/7/4/4/JOSTIKERO_92/49B.jpg

https://k61.kn3.net/taringa/F/C/4/D/0/5/JOSTIKERO_92/0C5.jpg

Acrylic Sheet Engraving

This is the most difficult step of this project, we must have a lot of patience and record the parts we want from the template with dremel

https://k61.kn3.net/taringa/2/D/3/F/B/C/JOSTIKERO_92/173.jpg

https://k61.kn3.net/taringa/5/A/2/5/E/6/JOSTIKERO_92/9EF.jpg

Design of the base

THE BASIS IS DESIGNED IN 3D TO PRINT IT, THEY CAN DOWNLOAD FROM HERE

https://www.thingiverse.com/thing:2494154

https://k61.kn3.net/taringa/6/D/3/1/4/C/JOSTIKERO_92/3DF.jpg

https://k60.kn3.net/taringa/1/F/5/E/9/2/JOSTIKERO_92/054.jpg

https://k61.kn3.net/taringa/2/A/C/6/0/7/JOSTIKERO_92/58B.jpg

Adding the RGB LED Strip

https://k61.kn3.net/taringa/3/7/6/9/9/9/JOSTIKERO_92/825.jpg

https://k61.kn3.net/taringa/F/4/2/9/D/C/JOSTIKERO_92/70D.jpg

wiring

https://k60.kn3.net/taringa/B/9/1/5/F/9/JOSTIKERO_92/EA6.jpg

FINAL

https://k61.kn3.net/taringa/3/7/F/6/F/1/JOSTIKERO_92/F7C.jpg

https://k61.kn3.net/taringa/8/2/3/B/7/0/JOSTIKERO_92/039.jpg

https://k60.kn3.net/taringa/4/E/1/8/2/8/JOSTIKERO_92/50A.jpg

https://steemitimages.com/0x0/https://steemitimages.com/0x0/https://orig14.deviantart.net/f434/f/2011/224/9/2/thanks_for_your_visit_by_jessiieshawty-d46bl08.png

https://steemitimages.com/0x0/https://steemitimages.com/0x0/https://orig07.deviantart.net/3a40/f/2010/049/0/5/please_leave_a_comment_by_luigipanda.png